Dean D80 Series Manual de Instruções descarregar pdf (Página 31)

DECATHLON SERIES GAS FRYERS

CHAPTER 1: SERVICE PROCEDURES

1-27

1.7.8 Replacing the Frypot (cont.)

23. Remove screw(s) securing the

electronic or standing pilot

bracket to the frypot bracket.

Reposition ignitor assembly down

and away from frypot. Use care

not to bend, kink or damage the

electronic ignition lines and

wiring.

NOTE: Remove the trailing pilot

assembly on current production

models as follows: Disconnect the

pilot supply line from the trailing

pilot valve on the burner

manifold. Remove the mounting

screw(s) as described in Step 23,

then remove trailing pilot.

24. Remove cotter pin from drain

valve linkage, then disconnect

actuator rod from drain valve

actuator.

25. Remove elbow (tee-fitting on

fryers equipped with front

manifold) and nipple from the

drain valve.

26. If ball-retainer nut breaks loose

and unscrews from the valve,

remove it from the elbow nipple

and re-install in valve. Use care

not to damage the brass threads

when removing from elbow

nipple, or when re-installing into

drain valve.

Removing electronic/standing pilot assembly.

Remove cotter pin (arrow), then disconnect the

actuator rod.

Ball retainer nut (arrow) on drain valve.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Sem comentários

Dean D80 Series Manual de Instruções Página 31